
Changing channel settings | 19 |
3 Press or to highlight Audio Only, then press or to | 4 Press or to highlight Auto Scan, then press ENTER. A |
select On. | confirmation box opens. |
4Press EXIT to close the menu.
Notes:
Audio Only works only when the input source is TV and your TV is receiving a broadcast signal.
To exit Audio Only mode, press any button. When you exit Audio Only mode, the Audio Only option is automatically reset to Off .
Changing channel settings
Automatically scanning for channels
To auto scan for channels:1Press MENU. The
5Press or
to select Yes, then press ENTER to start the scan. A progress box shows the progress of the scan.
Selecting the signal source
2Press or
to highlight Channel, then press
. The Channel menu opens.
1Press MENU. The
2Press or
to highlight Channel, then press
. The Channel menu opens.
3 Press or
to select Air or Cable.
3 Press or
to select Air or Cable. 4 Press EXIT to close the menu.