
Changing channel settings | 21 |
6Press EXIT to close the menu.
7To select a channel in the favorite channel list, press FAVORITE, press or
to highlight the channel, then press ENTER.
7Press or
to select a character, then press
or
to move to the next position. Repeat this step to add more characters.
8Press MENU to exit to the previous menu.
Adding or changing a channel label
If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled.
To label a channel:1Press MENU. The
2Press or
to highlight Channel, then press
. The Channel menu opens.
3Select the signal source of the channel you want to label.
4Highlight Channel No. , then press or
to select the channel you want to label.
5Press or
to highlight Channel Label.
6Press ENTER to open channel label screen. The Channel Label screen opens.
Checking the DTV signal strength
You can check the DTV signal strength to determine if you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation.
To check the DTV signal strength:1Press MENU. The
2Press or
to highlight Channel, then press
. The Channel menu opens. The DTV signal strength is shown at the bottom of the menu.
3Press EXIT to close the menu.