Dynex DX-L26-10A Maintenance, Specifications, General, Cleaning, Remote control, Type, Panel, Weight, TV system, Audio out, Dimensions, Input ports, Output ports, Control ports

Maintenance

Remote control

	Problem	Solution
	Problem	Solution

	Remote control does not	• Make sure that the power cord is
	work.	plugged in.
		• Make sure that there are no
		obstructions between the remote
		control and the remote control
		sensor on the front of the TV.
		• Make sure that the batteries are
		installed correctly. For more
		information, see “Installing
		remote control batteries” on
		page 9.
		• Replace the batteries. For more
		information, see “Installing
		remote control batteries” on
		page 9.

General

	Problem	Solution
	Problem	Solution

	One or more channels do	• Make sure that the channels are
	not display.	not blocked. For more
		information, see “Setting parental
		control levels” on page 23.
		• Make sure that the channels are
		not hidden. For more information,
		see “Hiding channels” on page 20.

	Password has been	• Enter 9999 to access parental
	forgotten.	controls, then set a new
		password.

	Some settings cannot be	• If a setting is grayed, the setting is
	accessed.	not available in the current video
		input mode.

	TV cabinet creaks.	• When the TV is in use, the
		temperature rises naturally and
		may cause the cabinet to expand
		or contract which can cause a
		creaking noise. This is not a
		malfunction.

	Control buttons on the TV	• Disconnect the power cord, wait a
	do not work.	few seconds, then reconnect the
		power cord and turn on the TV.

•Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a weak detergent solution.

•Use an eyeglass cleaner to clean the screen. Never use alcohol, paint thinner, or benzine.

•Before using a chemically treated cloth, read the instructions that came with the cloth.

Specifications subject to change without notice.

Weight and dimensions shown are approximate.