Dynex DX-LCD22-09 To adjust the sound:, To receive MTS/SAP broadcasts:, To change the system settings:, Tint, Sharpness, Warm, Cool, Sound Mode, News, Music, Movie, Bass, Treble

Using your TV

Option	Description
Tint	Lets you adjust the image tint.
Sharpness	Lets you adjust the image sharpness.
Color Mode (color	Lets you select a preset color mode:
temperature)	• Warm—Enhances red tones
	• Cool—Enhances blue tones
	• Normal—The default setting

3Press MENU to return to the previous menu or EXIT to resume normal viewing.

Adjusting the sound

To adjust the sound:

1Press MENU. The Picture menu opens.

2Press or to select Audio, then press . The Audio menu opens.

3Press or to highlight an option, then press or to adjust that option. Available options include:

Option	Description
Sound Mode	Lets you select preset sound mode:
	• News—For news programs
	• Music—For music programs
	• Movie—For movie programs
	• Personal—You make the settings
	Note: You can also cycle through the sound modes by pressing
	AUDIO.
Bass	Lets you adjust the low (bass) sounds.
Treble	Lets you adjust the high (treble) sounds.
Balance	Lets you balance the volume left to right.
Surround	Lets you turn surround sound effects on or off.
AVC (auto volume	Lets you turn AVC on, to equalize overall volume
control)	levels across all channels, or off.
Audio Language	Lets you select an alternate language, if the
(digital programs)	program has this option.

4Press MENU to return to the previous menu or EXIT to resume normal viewing.

15

Receiving MTS/SAP broadcasts

Your TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies those programs, if the station transmits them.

To receive MTS/SAP broadcasts:

•Press MTS/SAP to cycle through the available stereo modes. Options include:

•Mono—Select for mono reception or to reduce noise on weak stereo programs.

•Stereo—Select for stereo programs.

•SAP—Select to automatically receive secondary audio programming when available.

Changing the system settings

To change the system settings:

1Press MENU. The Picture menu opens.

2Press or to select Setup, then press . The Setup menu opens.

3Press or to highlight an option, then press or to adjust that option. Press or ENTER to access a sub-menu (such as Advanced or Closed Caption). Available options include:

Option	Description
Menu Language	Lets you select the language for the on-screen
	menus.
Transparency	Lets you turn the on-screen menu transparency
	on or off.
Zoom Mode	Lets you select the picture aspect ratio according
	to the video signal type:
	• Normal—Adjusts the aspect ratio to match
	the signal source (4:3 or 16:9)
	• Wide1—Enlarges the picture. The left and
	right sides may be cropped.
	• Wide2—Displays a full-screen picture.
	• Zoom—Enlarges the picture. May crop the
	top and bottom.
	• Cinema—Stretches the picture at the edges
	while maintaining a good proportion at the
	center of the screen.
	Note: You can also cycle through the zoom modes by pressing
	ZOOM.