20

Adjusting advanced VGA settings

To change the advanced VGA settings:

1Press MENU. The Picture menu opens.

2Press or to select Setup, then press . The Setup menu opens.

3Press or to highlight Advanced, then press or ENTER. The Advanced sub-menu opens.

4Press or to highlight an option, then press or to adjust the option. Available options include:

Option

Description

 

 

H-Pos

Lets you adjust the horizontal position of the image to

 

the left or right.

 

 

V-Pos

Lets you adjust the vertical position of the image up or

 

down.

 

 

Clock

Lets you adjust the sample frequency of the image.

 

 

Phase

Lets you adjust the phase of the image to improve the

 

focus.

 

 

Auto

Lets you activate the auto adjustment setting, which

 

automatically optimizes the image.

 

 

5Press MENU to return to the previous menu or EXIT to resume normal viewing.

Assembling the stand and removing the stand column

Assembling the stand and removing the stand column

You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column.

Cautions:

Read these instructions thoroughly before attempting this installation. Make sure that you handle your TV very carefully when attempting

assembly or removal of the stand. If you are not sure of your ability to do this, or of your ability to use the tools necessary to complete this job, refer to a professional installer or service personnel. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or improper assembly.

When using a table or bench as an aid to assembly, make sure that you put down a soft cushion or covering to prevent accidental scratching or damage to your TV’s finish.

The speaker is not intended to support the weight of your TV. Do not move or handle your TV by the speaker. This can cause damage to your TV that is not covered by the manufacturer’s warranty.

Before attempting assembly or removal of the stand, unplug the AC power cord.

To install the stand:

1Remove the stand from the box and place it on a table or bench.

Stand

2Hold your TV upright and align the stand column on the TV with the stand groove on the stand, then insert the TV into the stand.

Stand column

Stand groove

Stand

3Gently push downward on the TV until it clicks into place.

Push downwards