22
•
or 
to stabilize the image. For best results, adjust the Phase setting before you adjust the Clock setting.
•
or 
to improve image clarity.
5Press MENU to close the menu.
Selecting the HDMI audio mode
You can select the HDMI audio mode for the device connected to the HDMI 1 IN jack only.
To select the HDMI audio mode:
1Press MENU. The
2Press 
or 
to select DETAIL, then press ENTER.
Detailil
Closed Caption
PC Settings
HDMI1 Audio |
| Auto |
|
|
|
3Press 
or 
to select HDMI1 Audio, then press ENTER.
Detailil
|
|
|
|
|
| Closed Caption |
|
|
| |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| PC settings |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HDMI1 Audio |
|
| Auto |
|
|
|
|
|
|
|
|
|
| Digital |
|
|
|
|
|
|
|
|
|
| Analog |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4Press 
or 
to select an HDMI1 audio mode, then press ENTER. You can select:
•
•
•
5Press MENU to close the menu.
Maintaining
Maintaining
Cleaning
•Before cleaning the screen, unplug your TV from the power outlet.
•Wipe the front panel and other exterior surfaces of your TV with a soft cloth immersed in lukewarm water, then wrung dry.
•Never use a solvent or alcohol. Do not spray insecticide liquid near your TV. Such chemicals may cause damage and discoloration to the exposed surfaces.
Servicing
Do not try to repair your TV yourself. There are no user serviceable parts inside. Turn off your TV, unplug the power cord, then contact an authorized service center.
Checking the remote control signal
If the remote control is not working correctly, you can use an AM radio or digital camera (including a cellular phone with
To check the signal with an AM radio:
1Tune the AM radio to a
2Point the remote control towards the radio, then push any button and listen. If the sound from the radio flutters, the remote control is working.
To check the signal with a digital camera:
1Point a digital camera towards the remote control.
2Push any button on the remote control and look at the camera's LCD viewfinder. If the infrared light appears on the LCD, the remote control is working.
Troubleshooting
Problem | Solution |
|
|
No power. | Make sure that the power cord is |
| plugged in. |
|
|
| If a power failure occurs, unplug the |
| power cord for 30 minutes to let your |
| TV reset itself. |
|
|
No picture or sound. | Make sure that your TV is turned on. |
|
|
| Make sure that the power outlet is |
| supplying power. |
|
|
| Make sure that the antenna or cable |
| TV is connected correctly and |
| securely. |
|
|
| If you are using an outside antenna, |
| check the condition of the wiring and |
| connections. |
|
|
| Try another channel. The problem |
| might be limited to the broadcasting |
| station. |
|
|
| Turn off your TV, wait for about one |
| minute, then turn it on again. |
|
|