8
# | Button | Description |
|
|
|
17 | CH / CH | Press to go to the next or previous |
|
| channel in the channel list, or to |
|
| select the external input mode. When |
|
| you press one of these buttons |
|
| repeatedly, you cycle between: |
|
| • Analog TV channels in the |
|
| channel list |
|
| • Digital TV channels in the channel |
|
| list |
|
| • Video1 |
|
| • Video2 |
|
| • Component1 |
|
| • Component2 |
|
| • HDMI1 |
|
| • HDMI2 |
|
| • PC |
|
|
|
Setting up your TV
Installing remote control batteries
To install remote control batteries:
1Open the battery compartment.
2Insert two AA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.
3Close the battery compartment.
Notes:
Make sure that you match the + and – symbols on the batteries with the symbols in the battery compartment.
Do not mix different types of batteries or old and new batteries.
If you do not intend to use the remote control for a extended period of time, remove the batteries to prevent leakage.
Setting up your TV
Connecting an antenna or basic cable
To connect an antenna or basic cable (no cable box):
•Connect one end of a 75 ohm coaxial cable to the antenna or basic cable wall jack, then connect the other end of the cable to the ANT. IN jack on the back of your TV.
Antenna
Coaxial cable
Cable
Notes:
Always unplug the coaxial cable when you move your TV.
If you use an antenna to receive analog TV, the antenna should also work for digital TV (DTV).
If you want to switch between antenna and cable, install an antenna selector.
If you need help connecting cable TV, contact your cable TV provider.
Connecting a cable or satellite box
Note: Installation methods may vary depending on the type of cable or satellite box. Contact your cable or satellite provider for more information.
To connect a cable or satellite box:
1Connect a 75 ohm cable to cable or satellite TV wall jack, then connect the other end to the Antenna IN jack on the cable or satellite TV box.
Satellite | Cable or satellite box |
|
ANT. IN RF OUT
Coaxial cable
Cable TV
Coaxial cable
2Connect a 75 ohm coaxial cable to the RF OUT jack on the cable or satellite TV box, then connect the other end to the ANT. IN jack on the back of your TV.
Do not try to recharge batteries