![](/images/backgrounds/170779/170779-6425x1.png)
Specifications | 25 |
Specifications
Specifications are subject to change without notice.
TV format | ATSC / | |
|
| |
Closed caption | §15.122/FCC (digital CC) | |
system | §15.119/FCC (analog CC) | |
|
| |
Channel coverage | Terrestrial VHF: 2~13 | |
(ATSC/NTSC) | UHF: 14~69 | |
| CATV: 2~13, A~W, W+1~W+94 (analog | |
| W+1~W+84), | |
|
| |
Tuning system | Channel frequency synthesized tuning system | |
|
| |
Channel access | Direct access keyboard, programmable scan, | |
| and up/down | |
Sound output | 10W, 8Ω × 2 | |
|
| |
Antenna input | VHF/UHF/CATV | |
| 75Ω unbalanced | |
|
| |
| Mini DIN | |
| Y: | |
| C: | |
|
| |
Video input | RCA jack × 2 | |
| ||
|
| |
Audio input | RCA jack (L/R) × 10 | |
| 500mV rms | |
Component video | RCA jack × 6 | |
input | Y: | |
Pb: | ||
| ||
| Pr: | |
|
| |
HDMI input | HDMI | |
|
| |
PC input | ||
| Mini jack ø3.5mm × 1 (audio) | |
|
| |
Coaxial digital audio | RCA jack × 1 | |
output | ||
| ||
|
| |
Analog audio output | RCA jack × 2 | |
|
| |
Remote control | Digital encoded infrared light system | |
|
| |
Operating | 41°F to 104°F (5°C to 40°C) | |
temperature |
| |
|
| |
Power requirements | 120 V AC ± 10%, 60 Hz ± 0.5% | |
|
| |
Power consumption | 220 W | |
(maximum) |
| |
|
| |
LCD | 37 inches wide XGA panel | |
|
| |
Dimensions | Without stand: | |
H × W × D | 26.5 × 37.5 × 5.0 inches | |
| (672.5 × 950 × 126.5 mm) | |
| With stand: | |
| 28.1 × 37.5 × 11.5 inches | |
| (713 × 950 × 290 mm) | |
|
| |
Weight | 45.5 lbs. (20.6 kg) | |
|
|
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Copyrights
Dolby Laboratories
This product incorporates copyright protection technology that is protected by method claims of certain US patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. Dolby and the symbol are registered trademarks of DOLBY LABORATORIES. All rights reserved.
HDMI™
Your TV incorporates HDMI™ technology. HDMI, the HDMI Logo and
Energy Star
Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency. Your TV is Energy Star compliant.
HDTV
The “HD TV” Logo is a trademark of EICTA.
Notices
Specifications and features are subject to change without notice or obligation.
For service and support call (800)