Dynex DX-LCDTV19 manual Changing channels, Selecting the picture mode, Viewing channel information

8 Using your LCD TV

4Press CH+ or CH– to select the channel you want to add or remove, then press ENTER to add or remove the channel from the list.

Changing channels

To change channels:

•Press CH+ or CH– to go to the next higher or lower channel in the memorized channel list.

Or, press the number buttons for the channel you want, then press

ENTER.

•Or, press CH.LIST to display the memorized channel list, press CH+ or CH– to select the channel you want, then press ENTER.

•Or, to select a sub-channel, tune to the main channel, press –, then press the number button for the sub-channel you want. For example, to select digital channel 11.1, press 11, press –, then press 1. To select analog channel 13.0, press 13, press –,then press 0. You must press – after you press 13, or you will go to digital channel 13.

Selecting the picture mode

To select the picture mode:

•Press PICTURE one or more times to select the mode you want. You can select Personal, Standard, Mild, or Fresh.

Viewing channel information

To view channel information:

• Press DISPLAY. Current channel information appears.

Setting the sleep timer

You can set an amount of time you want your LCD TV to wait before it turns off automatically.

To set the sleep timer:

•Press SLEEP one or more times to select the time you want. You can select Sleep Timer-0min, Sleep Timer-5min, Sleep Timer-10min, Sleep Timer-15min, Sleep Timer-30min, Sleep Timer-4 min, Sleep Timer-60min, Sleep Timer-90min, Sleep Timer-120min, Sleep Timer-180min, or Sleep Timer-240min.

Adding favorite channels

To add a favorite channel:

1Press CH.LIST. The channel list opens.

2 Press CH+ or CH– to select a channel.

3 Press FAVORITE to add the channel to the favorites channel list.

4To remove a favorite channel, open the channel list, select the channel you want to remove, then press FAVORITE.

Tuning to a favorite channel

To tune to a favorite channel:

1Press FAVORITE. The favorite channel list opens.

2Press CH+ or CH– to select the channel. Your LCD TV automatically tunes to the channel you selected.

Adjusting picture settings

To adjust picture settings:

1Press MENU, then press CH+ or CH– one or more times until the following menu opens.

2Press VOL+ or ENTER, then press CH+ or CH– to select an option. You can select:

•Picture Mode–Selects the picture mode. You can select Personal, Standard, Mild, or Fresh.

•Contrast–Adjusts the contrast.

•Brightness–Adjusts the brightness.

•Sharpness–Adjusts the sharpness.

•Color–Adjusts the color saturation.

•Tint–Adjusts the color tone. This option is only available in NTSC mode.

•Aspect Ratio–Selects the aspect ratio. You can select Wide,

Zoom, Cinema, Full Screen, or Normal.

Note: You can also press PICTURE to select the picture mode.

3Press VOL+ or ENTER, then press VOL+ or VOL– to adjust the option.

Adjusting advanced video settings

To adjust advanced picture settings:

1Press MENU, then press CH+ or CH– one or more times until the following menu opens.

Note: The options shown in this graphic are for TV mode. For other modes, the options vary.

2Press VOL+ or ENTER, then press CH+ or CH– one or more times to select Advanced Video Menu.

3Press VOL+ or ENTER. The following menu opens.

4Press CH+ or CH– to select an option. You can select:

•Noise Reduction-Spatial–SelectOn or Off.

•Noise Reduction-Speckle–SelectOn or Off.

•Noise Reduction-Temporal–SelectOn or Off.

•Color Temperature–SelectNeutral, Warm, or Cool.

•3D Y/C–SelectOn or Off.