Dynex DX-R27TV VOL, VOL, VOL, CH +, EXIT, CH +, Press, VOL +, Press, ENTER, Press, Press, TUNER, Press, VOL +, VOL +, Press, VOL +, SETUP, V-CHIP, V-CHIP, RRT SET, VOL, VOL

Using the TV

--Set the volume to the minimum setting, then press the volume down button on the TV and the 0 button on the remote control at the same time.

--Hold for more than two seconds, then reset the password.Setting a passwordTo set a password:1Press MENU/ENTER. The menu screen appears.

2Press the VOL + and VOL - buttons to select the OPTION menu.

3 Press the CH + and CH - buttons to select V-CHIP.

4 Press the VOL + button. The password entering screen appears.

5Select and enter a password (4 digits) using the 0-9 number buttons, then press MENU/ENTER.

6Enter the same password again to confirm, then press MENU/ ENTER to set the password.

7Press EXIT to return to the normal screen.Setting the V-ChipTo set the V-Chip:

1Press MENU/ENTER. The menu screen appears.

2Press the VOL + and VOL - buttons to select the OPTION menu.

3 Press the CH + and CH - buttons to select V-CHIP.

4 Press the VOL + button. The password entering screen appears.

5Enter your 4-digit password using the 0-9 number buttons, then press MENU/ENTER. The V-CHIPmenu appears.

6Press the CH + and CH - buttons to select V-CHIP SET, then press the VOL + button. The V-CHIP SET menu appears.

7Press the CH + and CH - buttons to select TV RATING, then press the VOL + and VOL - buttons to display the desired rating.

•OFF—TV RATING is not set•TV-Y—All children•TV-Y7—7 years old and above•TV-G—General audience•TV-PG—Parental guidance•TV-14—14 years old and above•TV-MA—17 years old and above

When you select TV-Y7, TV-PG, TV-14, or TV-MA, press -/DISPLAYto further define the rating. Press the CH + and CH - buttons to select the desired rating you want. Press the VOL + and VOL - buttons to select the setting ON or OFF.

8Press the CH + and CH - buttons to select MOVIE RATING, then press the VOL + button. The RATING menu appears.

9Press the CH + and CH - buttons to select the rating, then press the VOL + and VOL - buttons to select ON or OFF for each rating.

•G—All ages•PG—Parental guidance•PG-13—Parental guidance less than 13 years old•R—Under 17 years old parental guidance suggested•NC-17—17 years old and above•X—Adult only

10Press MENU/ENTER twice to return to the V-CHIPmenu, then press the CH + and CH - buttons to select V-CHIP.

11Press the VOL + and VOL - buttons to elect ON. Your settings are now set into memory.

12Press EXIT to return to the normal screen.Watching a protected showTo watch a program that is blocked by the V-Chip:1Press MUTE.2Enter the password, then press MENU/ENTER.

After you enter the password correctly, the protection is temporarily overridden. If the television is turned off, or if the channel is changed, the V-Chip restriction is reactivated.

Changing the passwordTo change the password:

1Press MENU/ENTER. The menu screen appears.

2Press the VOL + and VOL - buttons to select the OPTION menu, then press the CH + and CH - buttons to select V-CHIP.

3Press the VOL + button to display the password entering mode. Use the number buttons (0-9) to enter your password, then press MENU/ENTER. The V-CHIPmenu appears.

4Press the CH + and CH - buttons to select CHANGE PASSWORD, then press the VOL + button to display a blank password screen.

5Enter a new password using the number buttons (0-9), then press

MENU/ENTER.6Enter the same password again to confirm, then press MENU/ENTER.

7Press EXIT to return to the normal screen.

Downloading the additional V-Chip rating system

As a supplement to the standard V-Chip rating system, your television is equipped to download an additional rating system, if such a system becomes available in the future.

Notes:

You can only download the additional V-Chip rating system when your television is receiving a digital signal.

When you download the additional rating system, it may take some time for the download to occur.

The V-Chip rating information and system are not determined or not controlled by the television or Dynex.

The downloadable V-Chip rating system is an evolving technology; therefore, availability, content, and format may vary.

The standard V-Chip rating system is available whether your television is receiving a digital signal or not, and will block both analog and digital programs. To set program blocking using the standard V-Chip rating system, select V-CHIP in step 5.

To download the additional V-Chip rating system (when available):

1Press TUNER to select the Digital mode.

2Press MENU/ENTER. The menu screen appears.

3Press the VOL + and VOL - buttons to select the OPTION menu, then press the CH + and CH - buttons to select V-CHIP.

4Press the VOL + button to display the password entering mode. Use the number buttons (0-9) to enter your password, then press MENU/ENTER. The V-CHIPmenu appears.

5With the television receiving a digital signal, press the VOL + and VOL - buttons to select V-CHIP SET (DTV), then press the CH - button.

6If the television is not storing the additional rating system, the TV will begin downloading the new rating system. This may take some time to download completely.

7Press the CH + and CH - buttons to select RRT SET, then press the VOL + button.

8Set your preferences for the content rating limits for the additional rating system.

Setting the clock

Note:

After a power failure or disconnection of the power, the clock settings will be lost. When this happens, reset the present time.

To set the clock:

1Press MENU/ENTER, then press the VOL + and VOL - buttons to select the SETUP menu.

2Press the CH + and CH - buttons to select CLOCK SET, then press the VOL + and VOL - buttons. The CLOCK SET menu appears.