Dynex DX-R27TV VOL, CH +, , or, EXIT, CH +, CH +, CH +, CH +, CH +, Press, VOL +, Press, Press, Press, VOL +, SETUP, Press, VOL +, Press, VOL +, LANGUAGE, Press the, VOL

Setting up the television

To select a setting using the TV buttons:•Use the CH and CH buttons and the VOL and VOL buttons.To select a setting using the remote control:• Use the CH + and CH - buttons and the VOL + and VOL - buttons.

Setting the language

You can choose from three different languages (English, French, and Spanish) for the on-screen displays.

To select a menu language:

1Press MENU/ENTER. The menu screen appears.

Note:

If no buttons are pressed for more than 60 seconds, the menu screen returns to normal television operation automatically.

2Press the VOL + and VOL - buttons to select SETUP menu.

3Press the CH + and CH - buttons to select LANGUAGE, then press the VOL + button.

4Press the VOL + and VOL - buttons to select the desired language:

•English (ENGLISH),•French (FRANÇAIS), or•Spanish (ESPAÑOL).5Press EXIT to return to the normal screen.

Memorizing channels

This television is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the television’s memory.

To use this television with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.

Selecting TV or cableTo select TV or cable input:

1Press MENU/ENTER. The menu screen appears.

2Press the VOL + and VOL - buttons to select the SETUP menu.

3 Press the CH + and CH - buttons to select TV/CABLE.4 Press the VOL + and VOL - buttons to select TV or CABLE.•TV—VHF/UHF channels•CABLE—Cable television channels

5Press EXIT to return to the normal screen.

Note:

It may take a few seconds for a digital channel picture to appear on screen after being selected.

CABLE CHART

The following chart is typical of many cable system channel allocations. The number on the top is the number on the television. The number or letter on the bottom is the corresponding cable channel.

Automatic memory tuning

Memorizing channels is best accomplished during evening “primetime” hours, as more channels are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set the channel into memory.

If you are not sure of the digital channels available in your area, visit www.antennaweb.org to find a list based on your address or zip code.

To automatically memorize channels:

1Press MENU/ENTER. The menu screen appears.

2Press the VOL + and VOL - buttons to select the SETUP menu, then press the CH + and CH - buttons to select AUTO CH MEMORY.

3Press the VOL + button. The television begins memorizing all of the channels available in your area.

After completing analog tuning, digital tuning starts automatically. Depending on the reception condition, it may take from 15 to 30 minutes to complete memorizing digital cable channels. Depending on the condition of the reception, the BAR display may not advance for several minutes.

Note:

Some new channels may be added. You should complete the AUTO CH MEMORY procedure periodically.

Adding and deleting channelsTo add or delete analog channels:1Press TUNER to select the Analog mode.2Press MENU/ENTER. The menu screen appears.

3Press the VOL + and VOL - buttons to select the OPTION menu, then press the CH + and CH - buttons to select ADD/DELETE.

4Press the VOL + button. The ADD/DELETE menu appears.

5Select the desired channel to be memorized or deleted using the CH + and CH - buttons.

6Press the VOL + and VOL - buttons to select ADD or DELETE.

7 Repeat steps 5-6 for other channels you want to add or delete. 8 Press EXIT to return to the normal screen.

To add or delete digital channels:1Press TUNER to select the Digital mode.

2Press MENU/ENTER. The menu screen appears.

3Press the VOL + and VOL - buttons to select the OPTION menu, then press the CH + and CH - buttons to select DIGITAL SETUP.

4Press the VOL + button. The DIGITAL SETUP menu appears.

5Press the CH + and CH - buttons to select ADD/DELETE, then press the VOL + button. The ADD/DELETE (DTV) menu appears.

6Press the CH + and CH - buttons to select ADD/DELETE, then press the VOL + button.

7Select the desired channel to be memorized or deleted using the CH + and CH - buttons.

8Press the VOL + and VOL - buttons to select ADD or DELETE.

9Repeat steps 6-8 for other channels you want to add or delete, then press MENU/ENTER.

10Press MENU/ENTER repeatedly to return to the normal screen.To add a digital channel you are watching:

1Press TUNER to select the Digital mode. Use the number buttons to directly select the digital channel you want to add.

2Press MENU/ENTER. The menu screen appears.

3Press the VOL + and VOL - buttons to select the OPTION menu, then press the CH + and CH - buttons to select DIGITAL SETUP.

4Press the VOL - button. The DIGITAL SETUP menu appears.

5Press the CH + and CH - buttons to select ADD/DELETE, then press the VOL - button. The ADD/DELETE (DTV) menu appears.

6Press the CH + and CH - buttons to select ADDING CHANNEL, then the VOL + button.

7Press MENU/ENTER repeatedly to return to the normal screen.8 Repeat steps 1-7 for other channels you want to add directly.