Dynex DX-TVM112 10 , You l l n ee d

10 Installation instructionsDX-TVM112

STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed

backs

1Align the left and right TV brackets (B and C) with the screw holes on the back of the TV.

2Place spacers (H or L) behind the TV brackets and the washers (F or G) over the holes in the TV bracket, then

insert the screws (E or K) through the washers, TV brackets, and spacers.

NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (F or G).

3Tighten the screws until they are snug against the TV brackets. Do not over tighten.

You ’l l n ee d

or

or

or

or

E

F (4)

E (4)

Phillips screwdriver

Screws Washers Spacers

H (4)

B and C TV brackets

G (4)

K (4)

or or or

L (4)

DX-TVM112_12-1056_MAN_V1_EN.fm Page 10 Sunday, November 25, 2012 6:55 PM

Contents

Main DX-TVM112 TV Wall Mount ASSEMBLY GUIDE 2 Safety information and specifications Tools needed Package contents 3 Package contents TV Hardware Bag ABC Installation instructions STEP 1 - Determine wall-mount location You l l ne ed Installation instructions 5 STEP 2 - Option 1: Installing on a wood stud wall CAUTION STEP 2 - Option 2: Installing on a solid concrete or concrete block wall* CAUTION: STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back STEP 4 - Select screws, washers, and spacers CAUTION: STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back J 10 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You l l n ee d NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (F or G). 3Tighten the screws until they are snug against the TV brackets. Do not over tighten. STEP 6 - Mounting the TV to the wall plate 12 Removing the TV from the wall plate