Manuals / Brands / TV and Video / TV Mount / Dynex / TV and Video / TV Mount

Dynex DX-TVM112 STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back

1 13

Download 13 pages, 5.89 Mb

Installation instructions 9

DX-TVM112

STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back

1Align the left and right TV brackets (B and C) with the screw holes on the back of the TV.

2Install washers (F or G), and screws (D, I, or J) into the holes in the back of the TV.

NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (F or G).

3Tighten the screws until they are snug against the TV brackets. Do not over tighten.

You’ll need

or

or

or

J

or

F (4)

D (4)

Phillips screwdriver

Screws Washers

B and C TV brackets

or or

I (4) G (4)

or

J (4)

DX-TVM112_12-1056_MAN_V1_EN.fm Page 9 Sunday, November 25, 2012 6:55 PM

Contents

Main DX-TVM112 TV Wall Mount ASSEMBLY GUIDE 2 Safety information and specifications Tools needed Package contents 3 Package contents TV Hardware Bag ABC Installation instructions STEP 1 - Determine wall-mount location You l l ne ed Installation instructions 5 STEP 2 - Option 1: Installing on a wood stud wall CAUTION STEP 2 - Option 2: Installing on a solid concrete or concrete block wall* CAUTION: STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back STEP 4 - Select screws, washers, and spacers CAUTION: STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back J 10 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You l l n ee d NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (F or G). 3Tighten the screws until they are snug against the TV brackets. Do not over tighten. STEP 6 - Mounting the TV to the wall plate 12 Removing the TV from the wall plate