Manuals / Brands / TV and Video / TV Mount / Dynex / TV and Video / TV Mount

Dynex DX-TVM112 STEP 6 - Mounting the TV to the wall plate

1 13

Installation instructions 11

DX-TVM112

STEP 6 - Mounting the TV to the wall plate

1Place the TV brackets (B and C) into the slotted flanges of the wall plate (A).

2Push the bottom of the TV toward the wall until the latch mechanism clicks into place.

and

HEAVY! You will need

assistance with this step.

Latched

DX-TVM112_12-1056_MAN_V1_EN.fm Page 11 Sunday, November 25, 2012 6:55 PM

Contents

Main DX-TVM112 TV Wall Mount ASSEMBLY GUIDE 2 Safety information and specifications Tools needed Package contents 3 Package contents TV Hardware Bag ABC Installation instructions STEP 1 - Determine wall-mount location You l l ne ed Installation instructions 5 STEP 2 - Option 1: Installing on a wood stud wall CAUTION STEP 2 - Option 2: Installing on a solid concrete or concrete block wall* CAUTION: STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back STEP 4 - Select screws, washers, and spacers CAUTION: STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back J 10 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You l l n ee d NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (F or G). 3Tighten the screws until they are snug against the TV brackets. Do not over tighten. STEP 6 - Mounting the TV to the wall plate 12 Removing the TV from the wall plate