Dynex DX-TVM112 Package contents

DX-TVM112

Package contents

Label Hardware Qty.

M4 × 12 mm

screw

M4 × 30 mm

screw

M4 washer

M6 washer

M4 spacers

M6 × 12 mm

screw

M6 × 20 mm

screw

M6 × 35 mm

screw

Label Hardware Qty.

M6 spacers

Lag bolt washer

5/16" × 2 3/4" lag bolt

Concrete anchor

10 20 30 40 50 60 70 80 90 100mm

1234in

DX-TVM112_12-1056_MAN_V1_EN.fm Page 3 Sunday, November 25, 2012 6:55 PM

Contents

Main DX-TVM112 TV Wall Mount ASSEMBLY GUIDE 2 Safety information and specifications Tools needed Package contents 3 Package contents TV Hardware Bag ABC Installation instructions STEP 1 - Determine wall-mount location You l l ne ed Installation instructions 5 STEP 2 - Option 1: Installing on a wood stud wall CAUTION STEP 2 - Option 2: Installing on a solid concrete or concrete block wall* CAUTION: STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back STEP 4 - Select screws, washers, and spacers CAUTION: STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back J 10 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs You l l n ee d NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (F or G). 3Tighten the screws until they are snug against the TV brackets. Do not over tighten. STEP 6 - Mounting the TV to the wall plate 12 Removing the TV from the wall plate