Dynex DX-TVM113

Installation instructions 11

DX-TVM113

STEP 6 - Mounting the TV to the wall plate

1Place the TV brackets (B and C) into the slotted flanges of the wall plate (A).

2Push the bottom of the TV toward the wall until the latch mechanism clicks into place.

HEAVY! You will need

assistance with this step.

Latched

DX-TVM113_13-0321_MAN_V2_EN.fm Page 11 Friday, April 26, 2013 11:11 AM

Contents

Main DX-TVM113 Slim-Profile TV Wall Mount ASSEMBLY GUIDE 2 Safety information and specifications Tools needed Package contents 3 DX-TVM113 ABCR Package contents TV Hardware Bag Installation instructions STEP 1 - Determine wall-mount location Youl l n eed Installation instructions 5 STEP 2 - Option 1: Installing on a wood stud* wall Note: Any drywall covering the wall must not exceed 5/8" (16 mm). R CA UTIO N: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts (P). STEP 2 - Option 2: Installing on a solid concrete* or concrete block wall CA UTI ON: directly onto the concrete surface. CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts (P). STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back STEP 4 - Select screws, washers, and spacers CA UT ION: STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back J 10 STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs Youl l need E Page Removing the TV from the wall plate