Installation instructions 7
DX-TVM113

STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages
and scratches.
2If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV
for instructions.
3Temporarily lay the TV brackets (B and C) on the back of your TV.
4Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5Identify which type of back your TV may have:
Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when
assembling the wall mount.
Obstructed back: The brackets block one or more of the jacks on the back of your TV. You will need spacers when
assembling the wall mount.
Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You will need spacers
when assembling the wall mount.
6Remove the TV brackets.
DX-TVM113_13-0321_MAN_V2_EN.fm Page 7 Friday, April 26, 2013 11:11 AM