Installation instructions 9
DX-TVM113
STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back
1Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the
brackets are level.
2Install washers (F or G), and screws (D, I, J, or L) into the holes in the back of the TV.
3Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You’ll need
or
or
or
J
F (4)
D (4)
Phillips screwdriver
Screws Washers
B and C TV brackets
or or
I (4) G (4)
or
L (4)
J (4)
Level
DX-TVM113_13-0321_MAN_V2_EN.fm Page 9 Friday, April 26, 2013 11:11 AM