Maintenance | 10 03 |
Water filter
To access the back of the machine ensure the feet are screwed into the cabinet before using the RollerjackTM handle to pull the machine out, see section 
details.
Cleaning the water inlet filters
The water inlet filters should be checked regularly for debris or limescale
•Turn off the water supply to the machine.
•Unscrew both water inlet hoses by hand.
•Using pliers, grip the coloured filters, pull them out and rinse them under cold water.
NB: Some water may remain in the hoses.
Emergency door release
This should be used in the event of a power cut to remove laundry.
•Switch off and remove the plug from the socket.
•Ensure the drums have stopped moving.
•If the machine has been running on a hot wash, leave it to cool down.
•Completely drain the washing machine see section 10 02 under ‘coin trap’.
•Remove the soap tray as described in section 10 01
•Using the Dyson spanner or a coin, turn the door release screw 1/4 of a turn clockwise to unlock the door.
•Replace the soap tray.
•Replace the filters, red to the hot fill and blue to the cold fill, and reconnect the water inlet hoses.
