Installation | 5 01 |
Specification
Dimensions Height 848mm Depth 575mm Width 595mm
Weight: 103kg.
Voltage:
Power: 2750W 230V. Please refer to rating plate (see section 1 01 for location).
Water pressure:
Capacity: 7kg dry laundry maximum.
Location
Every Dyson washing machine is tested before it leaves the factory. As a result, there may be some dampness or water in the machine.
•The machine should not be installed in a location where the temperature may drop below freezing.
•The machine should not be installed in a bathroom.
•The machine must be installed on a secure and flat surface. Soft floors, such as carpet or carpet tiles, are not suitable. The layout of the drainage taps and power socket and their distance from the machine are illustrated below. The water inlet hoses, drainage hose and electrical mains lead must be positioned carefully to avoid damage or kinks when the machine is in use. The machine can be connected to a standpipe,
Important
595mm
600 mm | 450 mm | 848 mm |
| ||
MAX. |
| |
MIN. |
| |
|
|
600 mm MAX.
450 mm MIN.
Drainage using an
Drainage, water supply and electricity
The washing machine comes with:
2 inlet hoses
1 drainage hose hook
1 Dyson spanner
1 drainage hose at the back of the machine
Cold inlet hose
Dyson spanner
Hot inlet hose
Drainage hose hook
Note: Hoses can be supplied in 2.5m lengths if required. Please contact the helpline to order.
The above items are found in the drum unless stated otherwise.
Drainage using a stand pipe*
