Front Rigging

Footrest—detachable, swingaway

WARNING: The footplates' lowest point should be no closer to the ground than 2-1/2 inches, to permit proper clearance.

WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.

Remove footrest

1.To release lock, pull swinga- way release lever forward, toward front of wheelchair. Footrest will swing outward.

2.To remove, lift footrest straight up off wheelchair hinge pins.

Attach footrest

1.Set footrest on wheelchair (so that footrest hinge plates engage wheelchair hinge pins).

2.Swing footrest inward.

3.Ensure that swingaway release lever is locked in a rearward position, toward back of wheelchair.

hinge plate

swingaway release lever

remove footrest

(left shown)

WARNING: Ensure that footrests are locked in place before oc- cupying or operating wheelchair.

3E01-INS-LAB-RevB08, December 2008 • Traveler SE Owner’s Manual

15

Page 15
Image 15
E&J 3E01-INS-LAB-REVB08 manual Front Rigging, Footrest-detachable, swingaway Remove footrest, Attach footrest