Crossbraces, Tighten crossbraces | E&J 3E01-INS-LAB-REVB08 guide

Crossbraces

Tighten crossbraces

M13 wrench, M6 hex key

Check the crossbraces to ensure that the bolt and nut securing both crossbraces in the center of the wheelchair are secure (crossbraces should be loose enough to fold easily, yet snug enough to take up excess play). Use a M13 wrench and M6 hex key to tighten.

3E01-INS-LAB-RevB08, December 2008 • Traveler SE Owner’s Manual

19

Image 19

E&J 3E01-INS-LAB-REVB08 manual Crossbraces, Tighten crossbraces

Contents

Manual Wheelchair Contents Introduction Page Important safety precautions Page Page Getting started Balance Handling tipsTransfer Activities Forward or sideward Reaching / bendingBackward Ascent Ramps And InclinesDescent Curbs and steps Rear wheels & casters Adjustments Arms Install armRemove arm Footrest-detachable, swingaway Remove footrest Front RiggingAttach footrest Loosen knob to free footplate extension inside hanger Adjust footplate extension length 1. See picture at right Ward Attach elevating legrest Adjust elevating legrest panel position Adjust legrest elevationAdjust legrest footplate extension length Tighten crossbraces Crossbraces Wheel locks Adjust wheel locks Transporting the Traveler SE Reassembly Do-it-yourself maintenance Maintenance General care List of tools Check anti-tippers optional Check tire wearCheck handrims Check wheel lock engagement Check backposts / push handles Check rear wheel adjustmentCheck upholstery Check arms Check wheel bearings Cleaning your Traveler SECheck footrests & elevating legrests Check casters Symptom Troubleshooting Traveler SE Manual Wheelchair Limited warrantyPage Index