Wheel locks
Adjust wheel locks
One M10 wrench
1.Use an M10 wrench to loosen the adjustment bolt until the wheel lock slides on the frame.
2.Place the wheel lock in the locked position and slide it into contact with the tire.
3.Place the wheel lock in the unlocked position and slide it 3/8" closer to the tire.
right rear wheel wheel lock
adjustment bolt 
right front frame
wheel lock
shown unlocked
4.Use an M10 wrench to tighten the adjustment bolt and engage the wheel lock to check the fit. The wheel lock should indent the tire at least 3/8".
5.Repeat steps
WARNING: Ensure that wheel locks are adjusted so that they
lock in place appropriately before occupying or operating wheelchair.
20 |
