hardwareingroupHofthehardwarepack(on page5).Pullonthecableandrotateitaroundthe bottomofthetrigger,withtheinnercableinthe slot,untilthecableendcanbepushedintothe triggerhousingandsnappedtight.SeeFigure12.

Trigger

Assembly

Inner Cable

Trigger

Housing

Barrel Slot

Fitting

this end

Figure 12

Note: When the cable is installed correctly, it should not be possible to pull cable out of the trigger housing.

Place the right turn trigger in position underneath the right handle. Secure with screw and weld nut from group H of the hardware pack. See Figure 13. You will need a phillips screwdriver for tightening the screw. Repeat on left side.

Turn

S_otrrigger

Cable

Figure 13

Secure the right turn trigger cable to the right lower handle, using cable tie provided in the hardware pack. Make sure to route the cable tie over the drive cable. See Figure 14.

Trigger Cable

Figure 14

Secure the left turn trigger cable to the lower handle using the other cable tie. Make sure to route the cable tie below the auger drive cable so that when the trigger cable is secured by the cable tie, the auger drive cable is left outside the cable tie. Trim excess ends from each cable tie.

NOTE: The right side cable tie must be used to keep cable from coming in contact with the moving shift arm from the transmission.

Lamp Wiring

•Wrap the wire from the lamp down the right handle. See Figure 15. Plug wire into the alternator lead wire under the fuel tank (see inset).

aandle

_Trlgger.C+able

_irm://_

_

:_t_/_

nator

Figure 15

IMPORTANT: Assemble your snow thrower, then

check the adjustments as instructed and make any

final adjustments necessary before operating the unit.

Failure to foltowthe instructions may cause damage to the snow thrower.

Final Adjustments

Adjusting Auger Control

To check the adjustment of the auger control,

push forward the left hand clutch grip until the rubber bumper is compressed. There should be slack in the clutch cable.

Release the clutch grip. The cable should be straight. Make certain you can depress the auger control grip against the left handle completely.

If adjustment is necessary, loosen the hex jam nut and thread the cable in (for less slack) or out (for more slack).

10

Page 9 Page 11
Page 10
Image 10
Craftsman 247.88851 owner manual Lamp Wiring, Final Adjustments
Page 9 Page 11

247.88851 specifications

The Craftsman 247.88851 is a standout lawn mower, designed to meet the needs of homeowners looking for a reliable and efficient gardening solution. This model combines innovative features with user-friendly technology to provide an exceptional mowing experience. Its power and performance are backed by a robust 21-inch cutting deck, making it ideal for tackling small to medium-sized yards with precision.

One of the notable features of the Craftsman 247.88851 is its 140cc engine. This engine offers sufficient power to handle various grass types and conditions, ensuring a clean and even cut every time. The starting mechanism boasts a reliable pull-start system, simplifying the operation and enhancing user convenience. This model also incorporates a 5-position height adjustment feature, allowing users to customize their mowing height according to their lawn's specific needs.

The Craftsman 247.88851 stands out with its ease of maneuverability. Its lightweight design and compact frame facilitate effortless navigation around obstacles such as trees and garden beds. The lawn mower is equipped with 7-inch front wheels and 8-inch rear wheels, providing excellent stability and traction. This stability is crucial for achieving optimal mowing results, especially on uneven terrain.

Another remarkable technology featured in the Craftsman 247.88851 is its superior grass collection system. The mower comes with a 1.9-bushel grass bag that efficiently collects clippings, ensuring a tidy lawn finish. Alternatively, users can opt for mulching functionality, which finely cuts and distributes the clippings back into the lawn, promoting healthy growth and providing essential nutrients.

In terms of build quality, the Craftsman 247.88851 is constructed with durable materials that withstand the rigors of regular use. Its sturdy design minimizes vibrations, resulting in a smoother mowing experience while reducing operator fatigue.

Overall, the Craftsman 247.88851 is an excellent choice for homeowners seeking a powerful, efficient, and easy-to-use lawn mower. Its combination of a strong engine, precise cutting capabilities, and advanced features makes it a valuable addition to any garden maintenance toolkit. Whether tackling overgrown patches or maintaining a well-groomed lawn, this mower delivers consistent and reliable performance.
Top Page Image Contents