,& WARNING: Always stop the engine, dis- connect spark plug wire and move it away from the spark plug before performing any adjustments or repairs,

Never attempt to clean the chute or make any adjustments while the engine is running.

Adjustments

Traction Drive Control

Refer to the Final Adjustment section of the Set-Up Instructions to adjust the traction drive control. If you are not sure of proper adjustment, check as follows.

Drain the gasoline or place plastic film under the gas cap if the snow thrower has already been operated.

Tip the snow thrower forward and remove the four self-tapping screws that hold the frame cover underneath the snow thrower.

With the traction drive control released, make sure that there is clearance between the friction wheel and the friction plate in all positions of the shift lever. See Figure 22.

Drive Shaft I

Drive

Sprocket

Shaft

Rod

Wheel

Plate

Figure 22

With the traction drive control engaged, make sure that the friction wheel is making contact with the friction plate. Also make sure that the overtravel spring is stretched.

If adjustment is necessary, loosen the jam nut on the traction drive cable and thread the cable

in or out as necessary.

Tighten the jam nut to secure the cable when correct adjustment is reached. Reassemble the frame cover.

NOTE: If you placed plastic under the gas cap, be certain to remove iL

Augers

The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a foreign object or ice jam, the snow thrower is designed so that the bolts will shear.

If the augers will not turn, check to see if the bolts have sheared. Replace if necessary. See Figure 23. Two replacement shear bolts and hex lock nuts have been provided in Group D of the hardware pack. See page 5.

Shear Bolt

\

Figure 23

Auger Clutch

To adjust the auger clutch, refer to Final Adjustment

section of Assembly Instructions.

Chute Assembly

The distance snow is thrown can be adjusted by adjusting the angle of the chute assembly.

Skid Shoe

The space between the shave plate and the ground can be adjusted by adjusting the skid shoe. Refer to page 10 of this manual.

Shift Rod

To adjust the shift rod, proceed as follows.

Remove the hairpin clip and flat washer from the

ferrule underneath the shift panel. Remove the ferrule from the hole in the shift lever.

Place the shift lever on the handle panel in the sixth (6) speed position (all the way forward). Push down on the shift rod (and shift arm assembly) as far as it will go. Hold it in this position. See Figure 24.

Thread the ferrule up or down the shift rod as necessary until the ferrule lines up with the upper hole in the shift lever.

2O

Page 20
Image 20
Craftsman 247.88851 owner manual Adjustments, Augers, Auger Clutch, Shift Rod

247.88851 specifications

The Craftsman 247.88851 is a standout lawn mower, designed to meet the needs of homeowners looking for a reliable and efficient gardening solution. This model combines innovative features with user-friendly technology to provide an exceptional mowing experience. Its power and performance are backed by a robust 21-inch cutting deck, making it ideal for tackling small to medium-sized yards with precision.

One of the notable features of the Craftsman 247.88851 is its 140cc engine. This engine offers sufficient power to handle various grass types and conditions, ensuring a clean and even cut every time. The starting mechanism boasts a reliable pull-start system, simplifying the operation and enhancing user convenience. This model also incorporates a 5-position height adjustment feature, allowing users to customize their mowing height according to their lawn's specific needs.

The Craftsman 247.88851 stands out with its ease of maneuverability. Its lightweight design and compact frame facilitate effortless navigation around obstacles such as trees and garden beds. The lawn mower is equipped with 7-inch front wheels and 8-inch rear wheels, providing excellent stability and traction. This stability is crucial for achieving optimal mowing results, especially on uneven terrain.

Another remarkable technology featured in the Craftsman 247.88851 is its superior grass collection system. The mower comes with a 1.9-bushel grass bag that efficiently collects clippings, ensuring a tidy lawn finish. Alternatively, users can opt for mulching functionality, which finely cuts and distributes the clippings back into the lawn, promoting healthy growth and providing essential nutrients.

In terms of build quality, the Craftsman 247.88851 is constructed with durable materials that withstand the rigors of regular use. Its sturdy design minimizes vibrations, resulting in a smoother mowing experience while reducing operator fatigue.

Overall, the Craftsman 247.88851 is an excellent choice for homeowners seeking a powerful, efficient, and easy-to-use lawn mower. Its combination of a strong engine, precise cutting capabilities, and advanced features makes it a valuable addition to any garden maintenance toolkit. Whether tackling overgrown patches or maintaining a well-groomed lawn, this mower delivers consistent and reliable performance.