• Reassemblethenewfrictionwheelrubbertothefrictionwheelassemblytighteningthesixscrewsin rotationandwithequalforce.
•Position the friction wheel assembly up onto
the pin of the shift rod assembly and slide the
shaft through the friction wheel. See Figure 30.
• Slide the shaft into the hex I.D. of the sprocket,
the spacer and the left ball bearing and secure
with the bell washer and hex bolt.
Carburetor
WARNING: Ifany adjustments are made to
the engine while the engine is running (e.g.
carburetor), keep clear of all movingparts.
Be carefulof heated surfaces and muffler.
Ifyou think the carburetor needs to be adjusted, see
your nearest authorized Tecumseh Service Outlet.
Shift Rod
Assembly
Bearin,
Washer
\
Figure 30
Friction
Wheel
These accessories were available when the snow thrower was purchased. They are also available at most
Sears retail outlets, catalog and service centers. Most Sears stores can order repair partsfor you when you
provide the model number of your snow thrower.

Belt

Scraper Bar

EngineOil Spark Plug
23