Manuals / Craftsman / Lawn and Garden / Snow Blower

Craftsman 247.88851 Attaching Clutch Cables, Attaching Shift Rod, Attaching Turn Triggers

Models: 247.88851

1 40
Download 40 pages 36.49 Kb
Page 9
Image 9

Attaching Clutch Cables

The clutch control cables are attached to the snow thrower. If the cables are attached to the top of the

engine with cable ties, cut the cable ties now. The Z ends of the clutch cables are hooked into the clutch

grips on each handle.

•Ensure there is a hex jam nut threaded all the way up the threaded portion of the Z fitting; extras are supplied in the hardware pack. See Figure 10.

•Place the clutch grip in the raised (up) position.

Z Fitting

Outer portion of cut-out

Nut

Hex Jam

Nut

\

Ferrule

(Viewed from the

underside of the control panel)

Figure 10

Swing the left auger up making sure the cable is

routed correctly in the cable roller guides located at the lower rear of the unit.

Hold the end of the cable at the barrel so the ferrule turns freely without twisting the cable. Thread the ferrule on to the Z fitting. You may have to pull on the cable slightly to relieve

tension. Keep the ferrule turning without twisting the cable.

You will reach correct adjustment when there is minimal slack in the cable but it is not tight.Hold the flats on the ferrule with pliers and tighten the jam nut against the ferrule. CAUTION: Cables will become loose if you do not tighten the jam nut.

A WARNING: There must not be any tension on either clutch cable with the drive or auger clutch grip in the disengaged (up) position.

These clutches are a safety feature. Do not

override their function by allowing tension on either cable with the clutches

disengaged.

Attaching Shift Rod

•Place the shift lever in the sixth (6) speed.

Place the bent end of the shift rod into the hole in the shift arm assembly. See Figure 11. Secure with 5/16 flat washer and hairpin clip from the hardware pack (group D on page 5).

Start threading the ferrule (included in the same group in the hardware pack) onto the other end of the shift rod. It has to line up with the upper hole in the shift lever (beneath the handle panel). While aligning the ferrule, push down on the shift rod and the shift arm assembly as far as it will go. Once the ferrule slides into the hole, turn it counter-clockwise one more full turn and insert it in the hole in the shift lever.

Shift

Chute Distance

Lever

Control

Drive

Auger

Clutch

 

Upper

 

Shift

Washer

Lever

 

 

Clip

Rod

Assembly

Clip

Figure 11

NOTE: It may be necessary to pull the shift lever out of the sixth speed position and move it towards the fifth

speed position until the ferrule slides into the hole without force.

•Secure the ferrule to the shift lever with another 5/16 flat washer and hairpin clip from group D of the hardware pack. See Figure 11.

•Make certain to check for correct adjustment of the shift rod as instructed in the Adjustment section before operating the snow thrower.

Attaching Turn Triggers

•Make sure that the right hand trigger cable is routed in front of the traction drive cable.

Feed the trigger cable up through the outer side of the slot in the handle panel. Do notfeed the cable through the same side of the slot as the Z fitting.

•Place the cable barrel fitting into the hole in the trigger. You can find the triggers and associated

Page 8 Page 10
Page 9
Image 9
Craftsman 247.88851 owner manual Attaching Clutch Cables, Attaching Shift Rod, Attaching Turn Triggers, Ferrule
Page 8 Page 10

247.88851 specifications

The Craftsman 247.88851 is a standout lawn mower, designed to meet the needs of homeowners looking for a reliable and efficient gardening solution. This model combines innovative features with user-friendly technology to provide an exceptional mowing experience. Its power and performance are backed by a robust 21-inch cutting deck, making it ideal for tackling small to medium-sized yards with precision.

One of the notable features of the Craftsman 247.88851 is its 140cc engine. This engine offers sufficient power to handle various grass types and conditions, ensuring a clean and even cut every time. The starting mechanism boasts a reliable pull-start system, simplifying the operation and enhancing user convenience. This model also incorporates a 5-position height adjustment feature, allowing users to customize their mowing height according to their lawn's specific needs.

The Craftsman 247.88851 stands out with its ease of maneuverability. Its lightweight design and compact frame facilitate effortless navigation around obstacles such as trees and garden beds. The lawn mower is equipped with 7-inch front wheels and 8-inch rear wheels, providing excellent stability and traction. This stability is crucial for achieving optimal mowing results, especially on uneven terrain.

Another remarkable technology featured in the Craftsman 247.88851 is its superior grass collection system. The mower comes with a 1.9-bushel grass bag that efficiently collects clippings, ensuring a tidy lawn finish. Alternatively, users can opt for mulching functionality, which finely cuts and distributes the clippings back into the lawn, promoting healthy growth and providing essential nutrients.

In terms of build quality, the Craftsman 247.88851 is constructed with durable materials that withstand the rigors of regular use. Its sturdy design minimizes vibrations, resulting in a smoother mowing experience while reducing operator fatigue.

Overall, the Craftsman 247.88851 is an excellent choice for homeowners seeking a powerful, efficient, and easy-to-use lawn mower. Its combination of a strong engine, precise cutting capabilities, and advanced features makes it a valuable addition to any garden maintenance toolkit. Whether tackling overgrown patches or maintaining a well-groomed lawn, this mower delivers consistent and reliable performance.