Husqvarna 11, 13, 11 Bio, 13 Bio manual Checking and adjustment of the throttle wire, Maintenance

MAINTENANCE

Checking and adjustment of the throttle wire

If the engine does not respond as it should when the throttle lever is moved, or if it produces black smoke or does not reach top speed, the throttle wire may need adjusting.

1.Release the clamping screw (see arrow) and push the throttle control to the choke position.

2.Pull the throttle wire’s outer casing to the far right and check that the choke is fully activated.

3.Tighten the clamping screw.

4.Pull the throttle control back to the full throttle position and check that the choke is no longer activated.

Replacement of the fuel filter

Replace the pipe fitted fuel filter every 100 running hours (once per season) or more frequently if it is clogged.

Replace the filter as follows:

1.Raise the engine cover.

2.Move the hose clips away from the filter. Use a pair of flat pliers.

3.Pull off the filter from the hose ends.

4.Press in the new filter on the hose ends. If necessary soap solution can be applied on the filter ends to simplify fitting.

5.Push the hose clips back on the filter.

6008-032

6008-033

8009-108

6008-034

26 – English