Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna 13 manual Lubrication Rider 11 and Rider 11 Bio, Lubrication of front wheel bearings

Models: 13 11, 13, 11 Bio, 13 Bio

1 52

Download 52 pages 31.33 Kb

Page 41

Image 41

LUBRICATION

Lubrication Rider 11 and Rider 11 Bio

Lubrication of front wheel bearings

On Riders with rear ejection the hood and wings must be removed so that the bar can be raised to allow removal of the wheel.

1.Remove the plastic cover on the hub.

2.Remove the lock-ring and washer on the front wheel axle.

3.Lift off the wheel.

4.Grease the axle journal with molybdenum sulphide grease*.

5.Assemble the parts in the reverse order.

IMPORTANT INFORMATION

Check that the lock-ring is correctly positioned in the slot.

*Grease from well-known brand names (petrol companies, etc.) usually maintains a good quality. The most important property is that the grease provides good protection against corrosion.

6008-030y

English – 39

Page 41

Image 41

Husqvarna 13 manual Lubrication Rider 11 and Rider 11 Bio, Lubrication of front wheel bearings, Important Information

Contents

English Rider 11 Rider 13 Rider 11 Bio Rider 13 BioOperator´s manual Svenska IMPORTANT INFORMATION CONTENTS Operator’s Manual for Rider 11 and RiderRider 11 Bio and Rider 13 Bio Dear customer INTRODUKTIONTravel and transport on public roads TowingSerial number SAFETY INSTRUCTIONSGood service EXPLANATION OF SYMBOLS General use Safety instructionsRead the operator’s manual before starting the machine Clear the area of objects before mowingPersonlig skyddsutrustning Keep children away from the area to be mowedSAFETY INSTRUCTIONS Make sure that you have first aid equipmentDriving on slopes Be especially careful when driving on slopesProceed as follows Mow upwards and downwards on slopes, not sidewaysChildren MaintenanceNever allow children to operate the machine Never fill the fuel tank indoorsThe engine and the exhaust system become very hot during operation Do not smoke when carrying out maintenanceRisk of burn injuries if touched SAFETY INSTRUCTIONSNever run the machine in an enclosed area Transportmachine SAFETY INSTRUCTIONSLocation of the controls PRESENTATIONPresentation Throttle and Choke lever PRESENTATION RIDER 11 / 11 BIOClutch pedal Brake pedal / Parking brakeSpeed limiter PRESENTATION RIDER 13/13 BIOParking brake Throttle and Choke leverLift lever for cutting unit Cutting unitRider 11 Bio and Rider 13 Bio have a twin-blade BioClip cutting unit Lifting of the cutting unit transport positionsee safety instructions Lever for adjustment of cutting heightSeat FuellingDRIVING the lever when you select neutral. If youBefore starting Starting the engineWarm engine Cold engineDRIVING 5. Set the throttle control midway between position 1 and2. For Rider 13 and Rider 13 Bio Driving the machineFor Rider 11 and Rider 11 Bio The clutch must be used for each gear changeMowing pattern Cutting tipsDRIVING IMPORTANT INFORMATIONStopping the engine Hill start, manual gearboxRelease lever Rider 13 and Rider 13 Bio DRIVINGMaintenance schedule MAINTENANCEMaintenance interval MaintenanceEngine hood Dismantling of the machine hoodsFront hood Rider 11 and Rider MAINTENANCELeft-hand fender Right-hand fenderMAINTENANCE EnglishMAINTENANCE Checking and adjustment of the steering wiresCheck and adjust the brakes on Rider 13 and Rider 13 Bio Adjusting the brake Rider 11 and Rider 11 BioPoorly adjusted brakes can result in reduced braking power Checking the brake Rider 11 and Rider 11 BioMAINTENANCE Checking and adjustment of the throttle wireReplacement of the fuel filter Replacing the air filter Do not use compressed air to clean the paper filterMAINTENANCE IMPORTANT INFORMATIONProcedures on contact with acid Check the level of the battery acidIgnition system Checking of the fuel pump’s air filterMAINTENANCE Inspecting the safety systemRider Rider Check the engine’s cooling air intake Checking the tyre pressureMAINTENANCE IMPORTANT INFORMATIONMAINTENANCE Checking the cutting unit’s parallelism32 - English MAINTENANCE6008-026H 8009-138Placing in service position MAINTENANCE RIDER 11 BIO/13 BIOService position for BioClip 5. Disengage the spring from the drive belt tensioning wheel MAINTENANCE RIDER 11 BIO/13 BIOMAINTENANCE RIDER 11 BIO/13 BIO Restoring from service positionTake care not to get your hand trapped Replacing the break-pin BioClip Checking the bladesKlippaggregat bakutkast BioClipCheck the engine’s oil level LUBRICATIONChanging the oil IMPORTANT INFORMATIONLubrication of belt tensioner Check the transmission’s oil level Rider 13 and Rider 13 BioGeneral lubrication LUBRICATIONLubrication of front wheel bearings Lubrication Rider 11 and Rider 11 BioCheck that the lock-ring is correctly positioned in the slot LUBRICATIONProcedure TROUBLE SHOOTING SCHEDULEProblem Winter storage ServiceSTORAGE Dimensions TECHNICAL DATAEngine Electrical systemRider 13 Bio Rider 11 BioTECHNICAL DATA DimensionsEU declaration of conformity Only applies to Europe EU-DECLARATION OF CONFORMITYPre-delivery service SERVICEJOURNAL RIDER 11/13After first 5 hours Work doneWork done SERVICEJOURNALDate, mileage, stamp, sign 46 - EnglishDate, mileage, stamp, sign SERVICEJOURNALWork done SERVICEJOURNAL ´+H$r¶6C¨Work done Date, mileage, stamp, signPage 114 00 ´+H$r¶6C¨ 2002W07