Husqvarna 11, 13, 11 Bio, 13 Bio Check the transmission’s oil level Rider 13 and Rider 13 Bio

LUBRICATION

Check the transmission’s oil level Rider 13 and Rider 13 Bio

1.Lift off the transmission cover. Release the two screws (one of each side) and lift off the trans- mission cover.

2.Check that there is oil in the transmission oil tank. Top up if necessary with engine oil SAE 10W/30 (class SF–CC).

Lubrication of belt tensioner

The belt tensioner must be lubricated regularly with high-quality molybdenum sulphide grease*.

Inject grease into the nipple on the right side below the engine bottom pulley until grease is forced out.

With daily use lubrication should be conducted twice a week.

6008-039H

6008-240H

6008-232

General lubrication

All joints and bearings are lubricated on manufac- ture with molybdenum sulphide grease. Re-grease with same type of grease*. Lubricate the steering and control wires with engine oil.

The machine should be lubricated regularly, and twice a week when used daily.

*Grease from well-known brand names (petrol companies, etc.) usually maintains a good quality. The most important property is that the grease provides good protection against corrosion.

38 – English