Install Batteries

Note: If you are changing battery size, you will need to reposition the brackets that keep the batteries secure in the base frame. The brackets should be snug enough to keep the batteries from moving.

Adjust battery brackets (if necessary)

Tools needed: M4 hex key

1.Use M4 hex key to loosen screws enough so that bracket is free to move along slots. Reposition bracket in desired location.

2.Use M4 hex key to tighten screws so that bracket does not move.

3.Repeat for other bracket.

 

front

 

controller

slot

location

rear battery

bracket

 

front battery

rear

install batteries

(rear wheel drive shown)

Install batteries

Tools needed:

Group 22 batteries: two 1/2" wrenches; U1 batteries: two 7/16" wrenches

Note: Observe controller location: front wheel drive controller is located at left rear; rear wheel drive controller is located at right front. Position the battery adjacent to the controller with its battery terminals away from the controller, to reduce the possibility of arcing. Position the other battery with its terminals on the opposite side from the first battery as shown below, to allow maximum space for routing cables.

1.Place batteries lengthwise in base frame, as shown at right.

Group 22 batteries: Install battery cable

 

 

 

positive wire terminal (+) on positive

battery

battery

 

battery terminal (+) of first battery as

terminal

cable

 

 

 

shown above. Use two 1/2" wrenches to

 

 

 

secure. Install battery cable negative wire

 

 

black

terminal (-) to negative battery terminal

 

 

connector

(-)of first battery as shown. Use two 1/2"

 

 

 

wrenches to secure.

 

 

power

U1 batteries: Install battery cable positive

battery

battery

cable

 

wire terminal (+) on positive battery ter-

terminal

cable

black

 

 

minal (+) of first battery as shown above.

 

 

connector

Use two 7/16" wrenches to secure. Install

 

 

 

battery cable negative wire terminal (-) to

connect batteries

 

negative battery terminal (-) of first bat-

 

 

 

tery as shown. Use two 7/16" wrenches to

 

 

 

secure.

 

 

 

Everest with Captain Seat Owner's Manual

GF0600050RevE06, August 2006

29

Page 28 Page 30
Page 29
Image 29
E&J GF0600050REVE06 manual Adjust battery brackets if necessary, Install batteries
Page 28 Page 30

GF0600050REVE06 specifications

E&J GF0600050REVE06 is a high-performance product known for its innovative features and advanced technologies. Designed to cater to the needs of both commercial and residential applications, this model has gained recognition for its reliability and efficiency in various environments.

One of the standout features of the E&J GF0600050REVE06 is its robust construction. Built with high-quality materials, it ensures durability and longevity in operations, making it a smart investment for users seeking long-term performance. The design is not only functional but also aesthetically pleasing, allowing it to blend seamlessly into different settings.

The E&J GF0600050REVE06 boasts significant energy efficiency, which is becoming increasingly important in today's eco-conscious market. With its state-of-the-art energy conversion technologies, it minimizes waste and enhances overall energy usage, providing significant savings on operational costs over time. Users can expect lower utility bills without compromising on performance, a crucial consideration for budget-conscious individuals and businesses alike.

Another noteworthy characteristic of this product is its user-friendly interface. Equipped with advanced control systems, it allows for easy monitoring and adjustment, catering to the varying needs of its users. Whether it's adjusting settings for optimal performance or accessing diagnostic features, the intuitive layout ensures that even those with minimal technical knowledge can operate the device effortlessly.

Moreover, the E&J GF0600050REVE06 incorporates several safety features, ensuring peace of mind during operation. These include automatic shut-off systems and temperature regulation, which protect the unit and the surrounding environment from potential hazards. This focus on safety not only enhances user confidence but also promotes a safer working environment.

Additionally, the technology behind the E&J GF0600050REVE06 supports seamless integration with other smart devices. This capability allows users to control and monitor the device remotely, facilitating greater flexibility and convenience in management.

In conclusion, the E&J GF0600050REVE06 stands out as a leading choice for those seeking advanced technology, energy efficiency, and a commitment to safety and durability. Its thoughtful design and innovative features make it an essential tool for modern users, enhancing productivity and operational effectiveness. With its excellent performance and user-centric approach, the E&J GF0600050REVE06 really sets itself apart in a competitive market.
Top Page Image Contents