E&J GF0600050REVE06 manual Battery indicator control system fault display

Models: GF0600050REVE06

1 48
Download 48 pages 37.23 Kb
Page 42
Image 42

Battery indicator control system fault display

The battery indicator also provides a diagnostic display. When a control system fault occurs, a set of lights will flash. Use the picture at left below to identify the fault code (the number of lights flashing), then see the system fault and appropriate action at the picture's right.

The following system faults will prevent the wheelchair from driving.

battery level indicator control system fault diagnostic guide table

1 light flashing rapidly

2 lights flashing rapidly

3 lights flashing rapidly

4 lights flashing rapidly

5 lights flashing rapidly

6 lights flashing rapidly

7 lights flashing rapidly

8 lights flashing rapidly

9 lights flashing rapidly

10 lights flashing rapidly

7 lights + S flashing rapidly

SYSTEM

 

FAULT

CHECK / ACTION

 

 

Low battery

The battery needs charging or there is a bad connection to the

voltage

batteries. Check the connections to the batteries and the controller

 

power connector. If the connections are good, try charging the battery.

 

 

Left motor

The left motor has a bad connection. Ensure that the motor is

disconnected

connected properly and the controller connectors are secure. If

 

problem persists, see dealer. (Check motor brushes)

 

 

Left motor

The left motor has a short circuit to a battery connection. See dealer.

wiring fault

(Check motor brushes)

 

 

Right motor

The right motor has a bad connection. Ensure that the motor is

disconnected

connected properly and the controller connectors are secure. If

 

problem persists, see dealer.

 

 

Right motor

The right motor has a short circuit to a battery connection. See dealer.

wiring fault

 

 

 

Inhibit active

The battery charger is preventing the controller from driving the

 

wheelchair. Disconnect charger from wheelchair.

 

 

Possible

A joystick fault is indicated. Ensure that joystick is in neutral before

joystick fault

turning ON/OFF switch on.

 

 

Possible

A controller fault is indicated. Ensure that all Controller connections

controller

are secure. If problem persists, see dealer.

fault

 

 

 

Possible

The park brakes have a bad connection. Check the park brake &

park brake

motor connections. Ensure that controller connections are secure.

fault

If problem persists, call dealer.

 

 

Excessive

This is usually caused by a poor battery connection. Check the

voltage

controller and battery connections.

 

 

Communication

A communication fault is indicated. Ensure that hand control cable is

fault

securely connected and not damaged.

 

 

42

GF0600050RevE06, August 2006

Everest with Captain Seat Owner's Manual

Page 42
Image 42
E&J GF0600050REVE06 manual Battery indicator control system fault display