swingaway release lever
lower hinge pin
footrest
Remove / attach footrest
Front Rigging
Footrest—detachable, swingaway
WARNING: The footplates' lowest point should be no closer to the ground than 2 1/2 inches, to permit proper clearance.
WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.
Remove footrest
1. To release lock, pull swingaway release lever forward, toward
front of wheelchair. Footrest will swing outward.
2. To remove, lift footrest straight up off wheel- chair hinge pins.
Attach footrest
1.Set footrest on wheelchair (so that footrest hinge plates engage wheelchair hinge pins).
2.Swing footrest inward.
3.Ensure that swingaway release lever is locked in a rearward position, toward back of wheelchair.
WARNING: Ensure that footrests are locked in place before occupying or operating wheelchair.
GF0700137RevA07, September 2007 • Paramount XD Owner’s Manual | 15 |
