E&J GF0700137RevA07 manual Elevating legrest-detachable, swingaway

Models: GF0700137RevA07

1 32
Download 32 pages 19.06 Kb
Page 17
Image 17

Elevating legrest—detachable, swingaway

WARNING: The footplates' lowest point should be no closer to the ground than 2 1/2 inches, to permit proper clearance.

WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.

Remove elevating legrest

1.To release lock, pull swingaway release lever forward, toward front of wheelchair. Legrest will swing outward.

2.To remove, lift legrest straight up off wheel- chair hinge pins.

Attach elevating legrest

1.Set legrest on wheel- chair (so that legrest hinge plates engage wheelchair hinge pins).

2.Swing legrest inward.

swingaway release lever

elevating legrest

Remove / attach elevating legrest

3.Ensure that legrest is locked in place and that swingaway release lever is locked in a rearward position, toward back of wheelchair.

WARNING: Ensure that legrests are locked in place before occupying or operating wheelchair.

GF0700137RevA07, September 2007 • Paramount XD Owner’s Manual

17

Page 17
Image 17
E&J GF0700137RevA07 manual Elevating legrest-detachable, swingaway