Adjust elevating legrest panel position | ||
The legrest panel has three |
| |
mounting positions one inch |
| |
apart on legrest tube. Refer | legrest tube stop | |
to picture at right. To adjust: |
| |
1. Rotate legrest panel / | elevating | |
legrest | ||
hinge plate assembly | legrest panel / | |
on legrest tube so that | ||
hinge plate | ||
legrest tube stop is in | assembly | |
center of hinge plate |
| |
slot. |
| |
2. Slide legrest panel / | Adjust legrest panel position | |
hinge plate assembly up |
| |
or down on legrest tube |
| |
to desired position. |
| |
3.Rotate legrest panel / hinge plate assembly on legrest tube so that legrest tube stop is aligned in desired position.
WARNING: Ensure that legrest panels are locked in place before occupying or operating wheelchair.
Crossbraces
Tighten crossbraces
M13 wrench, M6 hex key
Check the crossbraces to ensure that the bolt and nut securing both crossbraces in the center of the wheelchair are secure (crossbraces should be loose enough to fold easily, yet snug enough to take up excess play). Use a M13 wrench and M6 hex key to tighten.
GF0700137RevA07, September 2007 • Paramount XD Owner’s Manual | 19 |
