E&J Traveler HTC manual Install elevating Legrests or optional footrests

Install elevating Legrests (or optional footrests)

M13 wrench

WARNING: The footplates' lowest point should be no closer to the ground than 2 1/2 inches, to permit proper clearance.

WARNING: Do not stand on the footplates; this could cause the wheelchair to tip.

1.	Set legrest on
	wheelchair frame (so
	that legrest hinge plates
	engage hinge pin bolts).
2.	Swing legrest inward.
3.	Use an M13 wrench to
	attach anti-theft nuts.
4.	Ensure that legrests
	are locked in place
	and that swingaway
	release levers are
	locked in a rearward

nut

swingaway release lever

hinge plate

position, toward back of

wheelchair.

remove elevating legrest /

optional footrest

WARNING: Ensure that front rigging is locked in place before occupying or operating wheelchair.

16 3J01-INS-LAB-RevA12 • Traveler HTC User Manual