PLOTTER OPTIONS
Plot Trail
The line extending from your present position is called a plot trail. This unit lets you custom- ize the plot trail with the following menu items. All of the items on the Plotter Options menu affect the plot trail.
Plot Trail Flashing
Since there can be many lines on the map- ping display, it’s helpful at to make the plot trail flash. This makes it easier to see. To do this, highlight the “Plot Trail Flashing” menu, then press the right arrow key. Press the EXIT key to return to the map. Repeat the above steps to turn the flashing off. Note: Plot trail flashing’s default is on.
Set Visible Plot Trails
The plot trail can be turned off, if desired. To turn it off, press the up or down arrow key until the “Set Visible Plot Trails” menu is highlighted. Now press the right arrow key. The screen at right appears.
Use the up or down arrow keys to select the desired plot trail, then press the left or right arrow key. Press the EXIT key to return to the Plotter Options menu.
Clear Current Plot Trail
To erase the plot trail extending from your present position, highlight the “Clear Current Plot Trail” menu, then press the right arrow key. A message box appears, asking you if you really want to erase the plot trail. Follow the directions on this message box.The unit returns to the mapping screen after the message box clears.
21
