Eagle Electronics 12 manual Clock Hours, Clock Alarm, Timers

is correct, then press the ENT key. The unit returns to the navigation, mapping, or windows display with the new time showing.

Clock Hours

Normally, the time shows in the twelve hour format (a.m./P.M..).To change it to 24-hour format, press the MENU key, then select the “CLK HRS” label. Now press the right arrow key to change it to 24, then press the EXIT key.

Clock Alarm

You can set an alarm (that works just like an alarm clock), by using the “Clock Alarm” menu. To set this alarm, press the MENU key, then high- light the “Clk Alm Set” label. Press the right arrow key. A screen similar to the one below appears. Using the right and left arrow keys, move the black box to the first number in the time that

you want to set. Now press the up or down arrow keys until the desired number shows. Continue until the time shown in the display is correct, then press the ENT key. The unit returns to the navigation, mapping, or win- dows display.

To turn the alarm on, press the MENU key, then select the “CLK ALM” menu. Press the right arrow key. The alarm is now activated.

When the alarm goes off, an audible tone sounds along with a flashing message on the screen. Press the EXIT key to turn the alarm off.

Note:The AccuMap 12 must be on in order for the alarms to work. In other words, if you set the alarm to go off at 7:00 a.m., then the AccuMap 12 will have to be on at 7:00 a.m., also.

TIMERS

The AccuMap 12 has two timers built in. One is a countdown timer and the other is a count-up timer. The countdown timer counts down from the time you put in to zero. The count-up timer starts at zero and counts up to the time you entered.

To set either timer, first switch to a screen that is showing the timer that you want to use. Next, press the MENU key, then highlight the desired timer set menu. In this example, we’re setting the countdown timer. Now press the right arrow key. A screen similar to the one below appears.

27