Eagle Electronics 12 manual Select Waypoints Waypoint list

press the left or right arrow keys until the desired route number appears. In this example, however, we’ll use route number one.

Beneath the route number is the route name menu. If you wish to name the route, highlight the “NAME” field, then press the right arrow key. Use the arrow keys to name the route, then press the ENT key when you’re finished.

Now highlight the top of the stack of gray boxes at the bottom of this screen as shown at right. This is the list of waypoints used in your route. To select the first waypoint in the route, press the right ar- row key. A new menu appears as shown below.

You can place a waypoint using the waypoint list or from locations on the map, or both. For the first waypoint, we’ll use the “Insert From WPTS” method. With the black box on this menu, press the right arrow key. A screen similar to the one below appears.

Select Waypoints - Waypoint list

Select the first waypoint either by using the way- point name or waypoint number menus. As you move through the list of saved waypoints, their date and time saved, icon, position, distance and bear- ing from your present position show at the bottom of the screen.When the desired waypoint appears that you want to use as the first waypoint on the route, move the black box to the “Add WPT To Route” label, then press the right arrow key. The unit returns to the route planning screen with this waypoint placed in the first location on the list as shown at right.

36