Eagle Electronics 642cDF manual Trolling Motor Bracket Installation single-frequency only

Models: 642c 642cDF

1 196
Download 196 pages 30.11 Kb
Page 30
Image 30

6.Route the transducer cable through or over the transom to the sonar unit. Make sure to leave some slack in the cable at the transducer. If possible, route the transducer cable away from other wiring on the boat. Electrical noise from the engine's wiring, bilge pumps, VHF radio wires and cables, and aerators can be picked up by the sonar. Use caution when routing the transducer cable around these wires.

WARNING:

Clamp the transducer cable to the transom close to the transducer. This can prevent the transducer from enter- ing the boat if it is knocked off at high speed.

If you need to drill a hole in the transom to pass the connector through, the required hole size will be 5/8".

Caution:

If you drill a hole in the transom for the cable, make sure it is lo- cated above the waterline. After installation, be sure to seal the hole with the same marine grade above- or below-waterline seal- ant used for the mounting screws.

7.Make a test run to determine the results. If the bottom is lost at high speed, or if noise appears on the display, try sliding the transducer bracket down. This puts the transducer deeper into the water, hope- fully below the turbulence causing the noise. Don't allow the transducer bracket to go below the bottom of the hull!

Trolling Motor Bracket Installation (single-frequency only)

1.Attach the optional TMB-S bracket to the transducer as shown in the following figure, using the hardware supplied with the transducer. (Note: The internal tooth washer is supplied with the TMB-S.)

Internal tooth washer

TMB-S bracket

Bolt

 

Nut

Flat washer

Attach motor mounting bracket to transducer.

2.Slide the adjustable strap supplied with the TMB-S through the slot in the transducer bracket and wrap it around the trolling motor. Posi- tion the transducer to aim straight down when the motor is in the wa- ter. Tighten the strap securely.

22

Page 30
Image 30
Eagle Electronics 642cDF manual Trolling Motor Bracket Installation single-frequency only

642c, 642cDF specifications

Eagle Electronics has made significant strides in the world of electronics with its flagship models, the 642cDF and 642c. These devices are tailored for enthusiasts and professionals alike, offering a combination of advanced technology, user-centric design, and robust performance.

One of the standout features of the Eagle Electronics 642cDF is its high-definition display. The device boasts a vivid color screen that enhances visibility and improves user interaction, making it easier for users to navigate through various functions and settings, even in bright sunlight. The display is also designed for durability, resisting scratches and damage from regular use.

Both the 642cDF and 642c come equipped with advanced GPS capabilities, ensuring precise navigation and location tracking. This feature is crucial for outdoor activities such as hiking, boating, and off-roading. The built-in mapping software includes a vast array of preloaded topographic maps, providing users with essential information about terrain, elevation, and points of interest.

In terms of connectivity, these models excel with Bluetooth and Wi-Fi capabilities. This allows users to seamlessly connect to other devices and share data without hassle. Whether it’s syncing with a smartphone or sharing navigation data with another device, the wireless options enhance the user experience significantly.

The design of the 642cDF and 642c is also notable. Ergonomically shaped, these devices fit comfortably in hand, and the layout of buttons and controls is intuitive and user-friendly. This attention to ergonomics makes prolonged use more comfortable and reduces the likelihood of user error.

Eagle Electronics has prioritized durability in its products. Both models are water-resistant and built to withstand harsh environmental conditions, making them ideal for outdoor enthusiasts who require reliable technology. The rugged construction means users can depend on them in any situation, whether they are sailing through rain or trekking across muddy trails.

Battery life is another key characteristic. The 642cDF and 642c have been engineered to provide extended usage on a single charge, allowing users to rely on their devices during long excursions without worrying about power depletion.

In conclusion, the Eagle Electronics 642cDF and 642c stand out as top-tier electronic devices in their category. With features such as a high-definition display, advanced GPS capabilities, robust connectivity, ergonomic design, durability, and impressive battery life, they are well-suited for both casual users and professionals seeking reliable and advanced electronic solutions for their activities. As technology continues to evolve, these machines remain at the forefront, proving their worth in the ever-competitive electronics market.