Section 5: Sonar Troubleshooting

If your unit is not working, or if you need technical help, please use the following troubleshooting section before contacting the factory customer service department. It may save you the trouble of returning your unit for repair. For contact information, refer to the last page, just inside the back cover of this manual.

Unit won't turn on:

1.Check the power cable's connection at the unit. Also check the wiring.

2.Make sure the power cable is wired properly. The red wire connects to the positive battery terminal, black to negative or ground.

3.Check the fuse.

4.Measure the battery voltage at the unit's power connector. It should be at least 10 volts. If it isn't, the wiring to the unit is defective, the battery terminals or wiring on the terminals are corroded, or the bat- tery needs charging.

Unit freezes, locks up, or operates erratically:

1.Electrical noise from the boat's motor, trolling motor, or an accessory may be interfering with the sonar unit. Rerouting the power and trans- ducer cables away from other electrical wiring on the boat may help. Route the sonar unit's power cable directly to the battery instead of through a fuse block or ignition switch.

2.Inspect the transducer cable for breaks, cuts, or pinched wires.

3.Check the transducer and power connector. Make sure it's securely plugged in to the unit.

Weak bottom echo, digital readings erratic, or no fish signals:

1.Make sure the transducer is pointing straight down. Clean the face of the transducer. Oil, dirt and fuel can cause a film to form on the trans- ducer, reducing its effectiveness. If the transducer is mounted inside the hull, be sure it is shooting through only one layer of fiberglass and that it is securely bonded to the hull. When attaching a transducer to the inside of a hull, ONLY use the epoxy available from LEI (order information is inside the back cover). Do NOT use RTV silicone rubber adhesive or any other type of epoxy. The LEI epoxy is specially formulated so that it will cure properly for shoot-through applications.

2.Electrical noise from the boat's motor can interfere with the sonar. This causes the sonar to automatically increase its discrimination or noise rejection feature. This can cause the unit to eliminate weaker signals such as fish or even structure from the display.

81

Page 88 Page 90
Page 89
Image 89
Eagle Electronics 642cDF manual Unit wont turn on, Unit freezes, locks up, or operates erratically
Page 88 Page 90

642c, 642cDF specifications

Eagle Electronics has made significant strides in the world of electronics with its flagship models, the 642cDF and 642c. These devices are tailored for enthusiasts and professionals alike, offering a combination of advanced technology, user-centric design, and robust performance.

One of the standout features of the Eagle Electronics 642cDF is its high-definition display. The device boasts a vivid color screen that enhances visibility and improves user interaction, making it easier for users to navigate through various functions and settings, even in bright sunlight. The display is also designed for durability, resisting scratches and damage from regular use.

Both the 642cDF and 642c come equipped with advanced GPS capabilities, ensuring precise navigation and location tracking. This feature is crucial for outdoor activities such as hiking, boating, and off-roading. The built-in mapping software includes a vast array of preloaded topographic maps, providing users with essential information about terrain, elevation, and points of interest.

In terms of connectivity, these models excel with Bluetooth and Wi-Fi capabilities. This allows users to seamlessly connect to other devices and share data without hassle. Whether it’s syncing with a smartphone or sharing navigation data with another device, the wireless options enhance the user experience significantly.

The design of the 642cDF and 642c is also notable. Ergonomically shaped, these devices fit comfortably in hand, and the layout of buttons and controls is intuitive and user-friendly. This attention to ergonomics makes prolonged use more comfortable and reduces the likelihood of user error.

Eagle Electronics has prioritized durability in its products. Both models are water-resistant and built to withstand harsh environmental conditions, making them ideal for outdoor enthusiasts who require reliable technology. The rugged construction means users can depend on them in any situation, whether they are sailing through rain or trekking across muddy trails.

Battery life is another key characteristic. The 642cDF and 642c have been engineered to provide extended usage on a single charge, allowing users to rely on their devices during long excursions without worrying about power depletion.

In conclusion, the Eagle Electronics 642cDF and 642c stand out as top-tier electronic devices in their category. With features such as a high-definition display, advanced GPS capabilities, robust connectivity, ergonomic design, durability, and impressive battery life, they are well-suited for both casual users and professionals seeking reliable and advanced electronic solutions for their activities. As technology continues to evolve, these machines remain at the forefront, proving their worth in the ever-competitive electronics market.
Top Page Image Contents