Eagle Electronics 900-00027-001 manual 1.3TransEagle Features and Settings, Enabled Radio Button

Page 6

1.3TransEagle® Features and Settings

1.3.1Communication Data Area

As we have already seen, this area of TransEagle® includes commands related to the configuration of network connections to Eagle printers.

1.3.1.1 Enabled Radio Button

This non-editable radio button shows the status of TransEagle’s® connections. If any of the printers you attempted to connect to were successfully connected, then the radio button will be enabled.

1.3.1.2 Broadcast Checkbox

Check this box to have TransEagle® send messages to all connected Eagles at one time whenever a message is transferred, either from ImageMaster or directly from TransEagle® (see below to learn how to transfer files). If unchecked, then messages will only be transferred to the selected Eagle printer (see 1.3.1.4).

1.3.1.3 Properties Button

Click this button to set the IP address of all connected Eagles (see figure 1.2.5). You will also see a button on the Eagle IP dialog labeled “Set Printer Names”. Click this if you wish to be able to give a meaningful name to each Eagle printer you are connected to. The names appear on each of the printer buttons in the same area.

1.3.1.4 Printer buttons

These five buttons shows all the printers that you are currently connected to. Any button that is enabled corresponds to a printer that is connected. Click on any one of the enabled buttons to select that printer as the current one to send messages to. See 1.3.1.3 to learn how to give the printers listed on the buttons meaningful names

1.3.2 Message File Data Area

This area contains commands for selecting files to send to the Eagle.

10/30/2001

Manual Part Number 900-00027-001