Eagle Electronics 900-00027-001 manual Transfer Area, Msg Transfer/Load/Parse Options, Index Area

Page 8

1.3.3 Transfer Area

1.3.3.1 Transfer Button

This button sends the current file shown in the File Name drop-down to the Eagle.

1.3.3.2 Auto Checkbox (Transfer)

If checked, then any file you select in the Message File Data area will be immediately sent to the Eagle, rather than waiting until you click the Transfer button.

1.3.4 Msg Transfer/Load/Parse Options

1.3.4.1 Transfer to Eagle/Load To Eagle/Smart Radio Buttons

These options toggle TransEagle’s® file transfer functionality between receiving from the Eagle, Loading to the Eagle, or determining smartly which function to perform.

1.3.4.2 Backup/Restore/Sync Buttons

Under development.

1.3.4.3 Pass User Prompt Checkbox

Check this box if you would like for user prompts contained in your messages to be sent to the Eagle “as is” so that the operator at the handheld terminal is responsible for entering the requested user data. If not checked, TransEagle® will ask you to enter any user data at the PC when transferring a file and the data you enter will be sent to the Eagle rather than the user prompt.

1.3.5 Index Area

This allows you to create an index of your messages with up to a 20-digit code. Used with a scanner provides point and shoot printing. Enable this function by clicking the Use button. Scan or type in your index code and the corresponding print message file will be transferred. The File Combo Box shows the name of the index file currently in use, default is index.txt. Size allows you to set the length of your index codes up to 20 digits with 11 digits as the default. Use Search when the index code is shorter than the target size you set.

10/30/2001

Manual Part Number 900-00027-001