Installation:
This Eagle radio allows you to make a maritime distress call to facilitate search and rescue. To be effective as a safety device, this radio must be used only within the geographic range of a
Installation Options
There are two ways to install the radio. You can choose:
•a deck or overhead mounted gimbal installation. The reversible mounting gimbal is fixed to to a suitable site and the radio is placed into it. The radio can be removed for storage and the viewing angle can be adjusted.
•a recessed installation. The radio is recessed into a cavity cut into a bulkhead. The radio fixture is permanent and the viewing angle cannot be adjusted.
Location Requirements
Please check these BEFORE doing any cutting or drilling.
Whichever installation method you choose, ensure that the chosen location:
•is at least 3' (1 m) from the antenna
•allows easy connection to (at least) a 10 Amp fused 13.6 V DC electrical source and the antenna
•is at least 1.5' (45 cms) from the compass to avoid creating magnetic deviation of the compass during radio operation
•has a suitable space close by for installing the microphone bulkhead mount
•provides easy access to the controls on the front panel
•provides reasonable access to the wiring at the back of the radio
The VHF has a large LCD screen with an optimum viewing angle of approx.
Note: If unsure, temporarily power up the radio and check for a suitable location.
Side
20˚
20˚
Top
20˚
20˚
EAGLE | 5 |
