Saving Present Position as a
Waypoint
(Quick
Save Feature)
• The UltraNav II lets you saveyour present position as
awaypointwith only
• one key press. This "Quick Save" feature lets you easily
save the position
• of a wreck or other locations.
To save your present position as waypoint, simply press the WAYPT
• QU
ICKSAVE
key. The UltraNav II takes
yourpresent
position and assigns
• the first available waypont
number to it.
Saving Present Position
-
View and Save Method
I The "Quick Save" feature doesn't let
you
select the
waypoint
number. You
have to use the next available number when
using
that method. The View
and Save method lets you pick the waypoint number that your present
position is stored in. (Note: You can store a position under a waypoint
number that already has a
position assigned to it using
this method.) To
save
your present position, press
the WAYPT
key. Now
press the
key
next
to the "V/PT SAVE" label. A screen similar to the one below appears.
The first waypoint number in
the list
appears
at the
top
of the
page. This is the number that
your present position will be
under. Your
position at
the time you pressed the
WAYPT key is shown in the
"CURRENT POSITION" box in
the middleof the screen. If
you
wish to save the location in the
CURRENT POSITION box un-
der this
waypoint number,
sim-
ar I....
FJ
EHT
To save the location underadifferentwaypoint
number, press
the
key next
to increase
the
waypoint number (i.e.
from
waypoint
number ito 2). Press the key next to the
"- WPT" label to decrease the
waypoint
number. Once
you've
decided the
waypoint number to save the
location
under, press the key next to the "USE CURRENT POSITION"
label. Then press the
key next to the "SAVE" label. This will store the
location under the waypoint number you selected and return to the last
used position, plot,
or
navigation screen.
62
H 36°08.866'
Ui 96°EQ.441'
Pressing the key adjacent to
the "2X/4X" label
enlarges ech-
oesfromtwotimestofourtimes
their normal size.
To switch between the split
screen zoom and full screen
zoom, press the
key adjacent
tothe "SPLIT/FULL' label. The
screen instantly splits
into two
sections. All
targets
on the left
are shown at four times the
size of the ones on the right. If you switch to the 2X zoom mode,
echoes
on the left side of the screen are shown at twice the size as the ones on
the
right. The echoes that scroll across the screen are the exact same
echoes on both sides of the screen. They're simply enlarged on
the left
side. This feature tracks the
bottom, keeping it on the
display at all times,
when.the automatic feature is on. Once
you've
set the zoom as desired,
press the CLEAR key to erase the menus.
ZOOM - MANUAL MODE
When you press the zoom
key
while the unit is in the manual mode,
the
screen shown below appears. All of the menus on this screen work
identically as described above. However, one additional menu item is
shown when the unit is in the manual mode: "ADJUST".
To adjust the zoom, press the key adjacent to the "ADJUST" label. A
screen similar to the one below appears. A zoom bar and adjust
arrows
appear
on the screen. The echoes on the left side of
th.e screen are the
ones
that appear between the
top
and the bottom of the zoom bar. Press
the up or down
arrow keys to
ove the zoom bar
up or down.
As
you adjustthe
zoom bar,
the
echoes move on the
left side of
the screen at the same time.
The zoom adjust menus will
automatically clear a few sec-
onds after
you've pressed the
last key. Remember, the
UltraNav II won't track the bot-
tom when it's in the manual
mode.
N _.c'__•.__'
ILON
CJJPRENT.F'iJi.T1ON
H4NGE FIELD
ply press the key next to the "USE CURRENT POSITION" label. The
• position
shown in the CURRENT POSITION box also will show in the
waypoint location at the
top of the screen. To save the
waypoint without
naming it; simply press the key next to the "SAVE" label. hst ri 37.3 tafl
0.
15
PDF compression, OCR, web-optimization with CVISION's PdfCompressor