CONSTRUCT DIGITAL
BOX
The UltraNav II Plus
can
display
the
depth, speed,
surface watertempera-
ture, and distance log in the upper left portion of the screen. When the
UltraNav II Plus is
firstturned
on, Onlythe depth is
displayed. You can turn
each digital display on as desired or turn all of them off, as desired.
To select the
digital displays menu,
first press the menu key
three times.
Next, press the key adjacentto
the "CONSTRUCT DIGITAL BOX' menu.
A screen appears that is similar to the one below.
Now
press the key adjacent to
the desired display. For ex-
ample, to turn the
temperature
display on, press
the
key adja-
cent to the "INCLUDE TEMP."
label. Once you do this, the
digital display
in the corner of
the screen will show the tem-
peraturein
additiontothe depth.
The temperature menu label
now shows "REMOVE
TEMP."
You can turn each displayon
or
off individually.
Press the CLEAR key to exit from this menu or wait approximately ten
seconds and the
menus will automatically clear.
To turn the entire
digital
box
off,
pressthe
MENU keytwice,then
press
the
key nexttothe 'TURN
DIGITAL BOX OFF' label. The
unit will return to the sonar
dis-
play with the
digital box
erased
from the screen. To turn it on
again, repeat•the
above
steps.
The
label on the second menu
page now reads "TURN DIGI-
TAL BOX ON."
NAVIGATION SCREEN
Use the navigation screen
when you're navigating to a
waypoint. It shows your Dis-
tance To Go
(DTG), Bearing
to
Waypoint (BRG), Local Time,
Speed Over Ground (SOG),
Course Over Ground (COG),
and Cross Track Error (XTE).
To use the
navigation screen,
first recall a waypoint, then
press the MENU key. Next,
press the
key
next to the "NAV
SCREEN" label. A screen similar to the one at right appears.
CUSTOMIZE SCREENS
The
digital displays
onthe bottom half of the Position and
Steering
screens,
plus alt the
displays on the
Navigation
screen can
be
changed as desired.
To show how this is
done, we'll use the Position screen as an example.
First, make certain the Position screen is displayed. If it isn't, press the
MENU key
while the unit is in the GPS mode. Now
press
the key next to
the
"POSITION SCREEN" label at the top of the
display.
To customize the Position
Screen, first press the MENU
key.
ThefirstGPS menu screen
appears. Press the
key
next to
the "CHANGE POSITION DIS-
PLAY" label. The
unit returnsto
the Position Screen with a black
box
around the Bearing (BRG)
label.
The black box identifies the
Bearing box as "ready for
change."
To
change the
Bearing display, press the
up
or down arrow keys
to select the
display that
you
want to show inside the box.
TURN DIGITAL BOX OFF
The
digital box is
displayed in the
upper
left corner
of the full sonar screen.
It has the digital depth and automatic/manual indicators. To turn this box
off, press the
MENU key twice,
then press the key adjacent to the 'TURN
DIGITAL BOX
OFF"
label.
Repeat the above,
steps
to turn the box on.
.
.,,,. ii
--a 2:69:16 PML OO8 MI ±.-.'..:;"1",.-'k '
NORMAL DISPLAY
24 53
DISPLAY READY FOR CHANGE
PDF compression, OCR, web-optimization with CVISION's PdfCompressor