Earthquake Sound manual TW-25S& TW-35SInstallation Guide, Flush Mount Assembly

TW-25S & TW-35S Installation Guide

Flush Mount Assembly Flush Mount Complete assembly Flush Mount Installation

Push assembled tweeter through cut out hole

Top Ring

Cut diameter: TW-25S=2” (50.8mm), TW-35S=3” (76.20mm)

Make sure that the top ring and

bottom cup snap when pushed

together

Panel

Twist on nut

Bottom Cupuntil the tweeter is secured

Fasten the panel clamp down from behind the panel.

Panel Clamp

Angle Mount Assembly & Installation

Earthquake has provided two (2)

mounting screws to be used inTop Ring the Angle and Surface options

Mounting screws

Bottom Cup

Panel

Surface Mount Assembly & Installation

Top Ring

Panel

Bottom Cup

www.earthquakesound.com