5)110V/220V Option: Should already be set
to the correct voltage depending on your region.
6)Power Supply: Comes with a replacement fuse directly under power inlet.
4)Speaker Outputs:
A)To use the XJ-300FR as a two channel amplifier, connect the right speaker to the R+ and R- terminals and the left speaker to the L+ and L- terminals.
B)To bridge the XJ-300FR as a one channel amplifier (or monoblock), connect the positive speaker wire to the L+ terminal and connect the negative speaker wire to the R- terminal. Do not connect anything to the two lower black terminals.
C)To use the XJ-300FR as a 2.1 channel amplifier, connect the right speaker to the R+ and R- terminals and the left speaker to the L+ and L- terminals. Then, connect the subwoofer positive to the L+ terminal and the subwoofer negative to the R- terminal.
5)110V/220V:
Do not attempt to change the voltage setting. The amplifier should already be set to the correct voltage depending on your region. If not, please contact your local Earthquake Sound dealer.
6) Power Supply:
To access the 250V replacement fuse, use a flat head screwdriver to pry off the plastic cover.
Specifications are subject to change without notice | XJ-300FR Manual |
