SPI9000 Inverter Unit FI9 – FI14 User Manual
September 2006
Jumper Selections on Option Board A9
The user can customize the functions of the inverter to better suit his needs by selecting certain positions for the jumpers on the OPTA9 board. The positions of the jumpers determine the signal type of analogue and digital inputs.
On the A9 basic board, there are four jumper blocks (X1, X2, X3 and X6), each containing eight pins and two jumpers. The selection possibilities of the jumpers are shown in Figure
X1 | X2 | X6 |
X3
Figure 4-10: Jumper Blocks on Option Board A9
For more information visit: www.EatonElectrical.com | MN04004002E |
