Eaton Electrical SPI9000 user manual Safety, Password S6.5.1

SPI9000 Inverter Unit FI9 – FI14 User Manual

September 2006

Safety

Note: The Security submenu is protected with a password. Store the password in a safe place!

Password (S6.5.1)

The application selection can be protected against unauthorized changes with the Password function (S6.5.1).

By default, the Password function is not in use. If you want to activate the function, enter the edit mode by pressing Menu Button Right. A blinking zero appears in the display and you can set a password with the Browser buttons. The password can be any number between 1 and 65535.

Note: You can also set the password by digits. In the edit mode, push Menu Button Right again and another zero appears on the display. Set ones first. To set the tens, press Menu Button Right, and so on. Confirm the password with the ENTER button. After this, you have to wait until the Timeout time (P6.6.3) (see Page 5-24) has expired before the password function is activated.

If you try to change applications or the password itself, you will be prompted for the current password. Enter the password with the Browser buttons.

You can deactivate the password function by entering the value 0.

56.5.1	56.5.1		56.5.1
Password	Password	Or	Password
Not in use	0		00

Figure 5-16: Password Setting

Note: Store the password in a safe place! No changes can be made unless a valid password is entered.

MN04004002E For more information visit: www.EatonElectrical.com 5-21